TKL T531 Noise Reduction Digital Equalizer with Spectrum Display 31 Bands For KTV Stage Performance
NOTE： we don’t ship the item to PO BOX address， and we only ship the item to English address,
so please leave us your physical English address when you pay.
If your country is not listed in our shipping policy, pls tell us
your city and zip code, we will check whether your city belong to remote area
or not, then tell you the accurate freight.Tks for your understanding and
coopearation.
Features:
– Standard 1U thin and light rack
– Dual-channel synchronous control 31-band DSP processing equalizer
– Each section with LED spectrum indication, real-time 31-band frequency point absolute accuracy 99%
– With noise reduction function of cutting-edge noise gate
– The input and output interface supports multiple types: TRS6.35/RCA/XLR XLR balanced interface
– EQ bypass:bypass the graphic equalizer in the signal path
– With save and recall function, 10 modes can be saved and recalled
Specifications:
– Power supply:
220V /110V(please select the voltage according to your need)
– Sound transmission gain: -1dB or 11dB
– Line input impedance: 15KΩ
– Line output impedance: 300Ω
– Frequency response: 20Hz-20kHz
– Signal to noise ratio: 82dB
– Power consumption: 30W
Package Included:
– 1 x Set of Audio Equalizer
-Dimonstration: 60*10*27cm
-Weight: 3.1kg
1. SAVE
: Save button. Press the SAVE button, and turn the knob CONTROL or GAIN to select any mode from 1-10. The screen displays numbers 1-10.
After confirming the mode, press SAVE to save the mode successfully.
2. RECALL
: Recall button. Press the RECALL button, turn the knob CONTROL or GAIN to select any mechanical type from 1-10. The screen displays 1-10
number options. After confirming the mode, press RECALL to recall the mode successfully.
3. BYPASS
: Pass-through button. Press the BYPASS button, the machine does not undergo any frequency band numerical adjustment, the screen
displays -, and the current state is the pass-through function. Press the button again to cancel the pass-through function.
4. LCD display
: Display the volume of the signal passing through the machine 01-100, save and recall mode 0-10, gain attenuation ±18db value, – through state.
5. CONTROL
: System control knob. When the machine is stationary, turn the CONTROL knob to adjust the volume of the machine. Press the CONTROL knob to
start frequency band parameter adjustment. Rotate the knob to jump to the 20-20K frequency band, and the blue light under the corresponding frequency
band on the panel will flash. Rotate the GAIN knob to increase or decrease.
6. 20db-20K
: 31-segment spectrum display light. 20db-20K frequency band selection. When the signal is input, the 31-segment signal light will change
according to the corresponding frequency band signal. The green light indicates normal status. The yellow light indicates the warning state. The red light
indicates the imminent state. The static state of the blue light represents normal. The flashing blue light means that the frequency band parameters can
be attenuated and adjusted.
7.GAIN
: Parameter gain attenuation knob. When the machine is stationary, turn the GAIN knob to adjust the machine volume. Press the GAIN knob to
start frequency band parameter adjustment. Rotate the knob to jump to the 20-20K frequency band, and the blue light below the corresponding frequency
band on the panel will flash. It can be attenuated by turning the GAIN knob to increase, and it will automatically exit this function without any operation
after blinking for 8 seconds.
Shipping Policy
We will send out the item within 2-3 days through DHL/EMS/FEDEX /UPS/SPEEDPAK/CHINA POST to the below countries:
Belgium, Netherlands, Luxembourg, Italy, Germany, France, United Kingdom, San Marino;
Austria ,Denmark ,Finland ,Greece ,Ireland ,GUERNSEY ,JERSEY ,Norway ,
Portugal , spain , Sweden , Switzerland;
Bulgaria,Cyprus,Estonia,Latvia,Lithuania,Malta,slovakia,slovenia;
Czech Republic, Hungary, Poland, Romania,.
Australia ,New Zealand ,Korea South, Malaysia, Thailand, Philippines ,Singapore , Bruniei ,Taiwan , Macau, Indonesia,
USA, Canada
We will send tracking number to your eBay email within 1 day after sending out your item
We will mark the item at the very low value, so that you do not need to pay for the tax or pay a little tax.
Payment policy:
We accept Paypal only.
Payments must be finished within 5 working days after bid, otherwise, Unpaid Item dispute will be reported to eBay.
Refund &Return policy
We take all the responsibility during delivery. If you do not receive your item, we will refund you the full money or send you a new item according to your request.
We can accept the return item within 60 days after the buyer receives it. Once we receive the return item, then we will refund you full money.
Feedback Policy
We will very appreciate you give us positive feedback
ASAP.  If the item you got in any problem, PLS don’t hesitates to contact us.  We will do our best to help solve the problem